Makita 440 Manual De Instrucciones página 20

EN
CAUTION: The cartridge fi lter must be kept clean at all times for the appliance to work
well.
- Attach the connector (M) of the fl exible hose (code 01321B0N) onto the air inlet con-
nection (Y) (fi g. "C2") and the adapter (U) onto the power tool attachment
(fi g. "C3").
- Plug in the power tool and the appliance as described in point "A3".
- Use the clamps (G) to attach the power tool power supply cord to the fl exible hose
(fi g. "C4").
- Position the switches as described in point "A2".
-------------------------------------------------------------------------
D - MAINTENANCE
1
.... DUST COLLECTION BAG
- The bag should not be reused, always replace the used bag with a new one.
To replace the dust collection bag.
- Remove the plastic fl ange (x) from the air inlet connector (y) (fi g. "D1" - "D2").
- Use the cap to close the plastic fl ange (fi g. "D3").
2
.... CARTRIDGE FILTER (fi g. "D4" - "D5")
- Remove the cartridge fi lter from the motor housing.
- Clean the cartridge fi lter frequently with a soft-bristled brush (fi g. "D4").
- For thorough cleaning, fl ush with water from the inside out (fi g. "D5").
- Make sure it is completely dry before using it again.
- Replace the fi lter only (b) if overly encrusted or worn
3
.... FOAM FILTER (fi g. "D6")
- Rinse the foam fi lter with water WITHOUT using detergent.
- Replace if worn or damaged.
4
.... POLYPROPYLENE BASKET PRE-FILTER (fi g. "D7")
- Shake basket fi lter into garbage bin to clean it.
- Blow air into it if necessary.
- Replace if worn or damaged.
5
.... EXHAUST FILTERS
- Replace exhaust fi lters regularly.
Always unplug the appliance before any
maintenance operations.
(fi g. "D8")
- 20 -