Teac AX-501 Manual Del Usuario página 11

Analog audio input connectors
A
(LINE 1), (LINE 2), (LINE 3), (XLR)
Use these to input stereo analog audio.
Connect cassette decks, CD players and other analog
audio output devices to these connectors.
Use a commercially available audio cable to connect
these devices.
LINE 1: RCA audio cable
LINE 2: RCA audio cable
LINE 3: RCA audio cable
XLR: Balanced XLR cable
Connect this unit's R jack with the R jack of the audio
output device. Likewise, connect its L jack to the other
in device's L jack.
o This unit's XLR connectors are 2: HOT.
AUTO POWER SAVE switch
B
Use to turn the automatic power saving function ON
and OFF.
When ON, the unit will automatically enter standby
mode if there is no audio input for about 30 minutes.
o When in standby mode, turn this unit's INPUT
SELECTOR or press a button on the remote control
to turn the unit ON.
Power inlet (~IN)
C
Insert the included power cord here. After complet-
ing all other connections, insert the power plug into a
power outlet.
Unplug the cord from the outlet when not using the
unit for a long time.
V Use only the included power cord. Use of a differ-
ent cord could cause fire or electric shock.
V Do not turn the unit on until after mak-
ing all connections.
o Carefully read the manuals of the devices that
you are connecting and follow their instructions
when making connections.
o Do not bundle connecting cables with power
cords. Doing so could cause noise.
o Connect all plugs completely.
EN
11