Technical Specification; Electrical Wiring - Buffalo CD965 Manual De Instrucciones

UK

Technical Specification

Model Voltage Power
CD965 230v 50hz

Electrical Wiring

This appliance is supplied with a 3 pin,BS1363 plug and lead, with a 13 amp fuse as standard.
The plug is to be connected to a suitable mains socket.
This appliance is wired as follows:
•
Live wire (coloured brown) to terminal marked L
•
Neutral wire (coloured blue) to terminal marked N
•
Earth wire (coloured green/yellow) to terminal marked E
This appliance must be earthed, using a dedicated earthing circuit.
If in doubt consult a qualified electrician.
Electrical isolation points must be kept clear of any obstructions. In the event of any emergency disconnection being required
they must be readily accessible.
Compliance
The WEEE logo on this product or its documentation indicates that the product must not be disposed of as
household waste. To help prevent possible harm to human health and/or the environment, the product
must be disposed of in an approved and environmentally safe recycling process. For further information on
how to dispose of this product correctly, contact the product supplier, or the local authority responsible for
waste disposal in your area.
BUFFALO parts have undergone strict product testing in order to comply with regulatory standards and
specifications set by international, independent, and federal authorities.
BUFFALO products have been approved to carry the following symbol:
All rights reserved. No part of these instructions may be produced or transmitted in any form or by any means,
electronic, mechanical, photocopying, recording or otherwise, without the prior written permission of BUFFALO.
Every effort is made to ensure all details are correct at the time of going to press, however, BUFFALO reserve the right
Current
800w 3.5A
to change specifications without notice
Dimensions
h x w x d mm
415 X 362 X 480
8
Weight
(kg)
9.3KG