Overheating Protection; Cleaning, Care & Maintenance; Troubleshooting; Technical Specifications - Buffalo CT931 Manual De Instrucciones

Overheating protection

This appliance is featured with an overheat protection. Should the temperature exceed safe levels the
appliance will automatically cut off power.
The thermal Cut-out switch is located on the rear of the appliance. To reset the appliance after a sufficient
cool-down period:
1. Unscrew the reset switch cover.
2. Press the small reset switch down until it clicks, using a blunt pointed instrument.
3. The appliance is now reset and can be used as normal.
Cleaning, Care & Maintenance
• A BUFFALO dealer or qualified technician should carry out repairs if required.
• Always switch off the appliance, disconnect the power supply and allow to cool before cleaning or
performing maintenance.
• If necessary wipe the exterior with a soft cloth and warm soapy water.
• Dry thoroughly after cleaning.

Troubleshooting

If your BUFFALO appliance develops a fault, please check the following table before making a call to the
Helpline.
Fault
The unit is not The unit is not switched on
working
Plug and lead are damaged
Fuse in the plug has blown
Power supply
Internal wiring fault
Overheating protection is activated

Technical Specifications

Model Voltage
CT931 220-240V~
50/60Hz
CT931_ML_A5_v2_20200326.indb 5
Probable Cause
Cooking
Power Current Surface
Diameter
3000W 13A 400mm
Solution
Check the unit is plugged in correctly and
switched on
Call BUFFALO agent or qualified Technician
Replace the plug fuse
Check power supply
Call BUFFALO agent or qualified technician
Reset the appliance
Temperature Dimensions
Range h x w x d mm
50ºC-300ºC 220 x 450 x 470
UK
Weight
20Kg
5
2020/3/26 15:13