McQuay A08019028194 Manual De Instalación página 5

1. Install The Suspension Bolts
Suspension Bolt
Hanger Cover
• Install the suspension bolts so that it can support the indoor
unit.
• Adjust distance to ceiling before installation.
• Refer to the dimension given to install the unit.
2. Install The Indoor Units
Hanger Rod
• Insert the suspension bolts into the fittings of the hanger
bracket.
• Set the nuts and washer on the both side of the metal
fittings.
• Secure it with nuts.
• Attach the hanger cover (4 pieces) to the units.
3. Floor Standing Installation
479.0
78.0
307.4
123.0
Floor
Rear Piping Hole
Hook The Unit On The
Mounting Bracket
• Refer to the dimension as illustrated when installing the
mounting bracket.
• When the rear piping, determine the pipe hose position.
Drill the pipe hole at the slight downward slant to the
outdoor side.
All manuals and user guides at all-guides.com
UNDER CEILING INSTALLATION
Suspension
Bolt
Hanger
Cover
Min 547.0 Mounting Bracket
Mounting Bracket
Wall
4. Piping And Drain Hose Installation (Under Ceiling Type)
Rear Piping And Drain Hose
• The piping direction can be 2 ways as illustrated.
• The drain hose is only 1 way.
5. Piping And Drain Hose Installation (Floor Standing Type)
6. How To Install The Drain Hose
Drain Pipe Holder
• Remove the two screws and the drain pipe holder.
• Cut a slit for the drain hose hole.
• Place the drain hose on the v-shape area and secure it
with drain pipe holder and two screws.
3
Upper Piping
OR
Rear Piping Hose
Wall
Piping And Drain Hose
OR
Wall
Piping And Drain Hose
Slit For Drain Hose Hole
Screws