Troubleshooting Guide - Sony XDP-210EQ Manual De Instrucciones

Troubleshooting guide

The following check help you remedy most problems that you may encounter with you unit.
Before going through the checklist below, check the connection and operating procedures.
Problem
The POWER indicator does not
light up.
Alternator noise is heard.
No sound
Cause/Solution
The ground lead is not securely connected. Ground the lead
securely to a metal part of the car.
Check the battery voltage (10.5 — 16 V).
The power connecting leads are run too close to the RCA pin
cords. n Keep the leads away from the cords.
The RCA pin cords are run too close to other electrical cables of
the car. n Keep the cords away from the cables.
The ground lead is not securely connected. n Ground the lead
securely to a metal part of the car.
The POWER indicator lights up when the master unit turns on.
n Check the amplifier and speaker connections.
The POWER indicator does not light up when the master unit
turns on. n Check the BUS cable, RCA pin cord and optical
cable connections.
EN
11