Using The Cooling Device - Dometic MF 5M Instrucciones De Uso

MyFridge MF5M
7.2

Using the cooling device

A
NOTICE!
• When using the refrigerator as a milk cooler, also see the instructions
in the customer documentation of your coffee maker.
• Like every refrigerator, your cooler must be properly ventilated so
that any heat created can dissipate. Otherwise, it may not work
properly.
I
NOTE
Seal the opening on the side of the appliance with the plug if you have
not fed a tube inside (fig. 3 A, page 4).
➤ Place the refrigerator on a firm base.
Ensure that the ventilation slots are at least 10 cm away from the wall so that the
heat that arises during operation can be drawn off.
I
NOTE
For use as a milk cooler for coffee makers only, the refrigerator has holes
in both sides, sealed with a black plug (fig. 3 A, page 4). Remove the
plug (fig. 3 B, page 4) and push the milk tube supplied into the
appliance. Now the coffee maker can draw up cold milk directly from
a suitable vessel inside the refrigerator.
➤ Insert the flat plug of the 230 V cable (fig. 1 2, page 3) into the socket
(fig. 2 1, page 3) on the appliance and insert the power plug into the 230 V
socket.
or
➤ Insert the flat plug of the 12 V cable (accessory) into the DC socket (fig. 2 2,
page 3) and connect it to the cigarette lighter socket or a 12 V socket in your car.
➤ Push the switch (fig. 3 3, page 4) on the control panel to "HOT" or "COLD" to
switch the device on.
✓ The refrigerator starts cooling/heating the interior and the appropriate LED lights
up.
A
NOTICE!
Ensure that the objects placed in the refrigerator are suitable for cooling
or heating to the selected temperature.
➤ When you stop using the refrigerator, set the switch (fig. 2 3, page 3) to "OFF".
EN
Operation
11