Wiring; Attachment Of Motor Housing - Craftmade STU54PLN3 Guia De Instalacion

All manuals and user guides at all-guides.com

6. Wiring.

CAUTION: Be sure outlet box is properly grounded and that a
ground wire (GREEN or Bare) is present.
Make sure all electrical connections comply with Local Codes or
Ordinances and the National Electrical Code. If you are
unfamiliar with electrical wiring or if the house/building wires
are different colors than those referred to below, please use a
GROUND/GREEN
BLACK
qualified electrician.
WHITE
WHITE
When fan is secured in place on the mounting plate, electrical
BLACK
wiring can be made as follows:
Connect BLACK and BLUE wire from fan to BLACK wire from
ceiling with wire connector provided.
Connect WHITE wire from fan to WHITE wire from ceiling
with wire connector provided.
Connect all GROUND (GREEN) wires together from fan to
BARE/GREEN wire from ceiling with wire connector provided.
If you intend to control the fan light with a separate light
switch connect BLUE wire from fan to the BLACK (or RED)
supply from the independent switch.
* Wrap each wire connector separately with electrical tape as
an extra safety measure.

7. Attachment of Motor Housing.

red dot
Align grooves inside the top of motor
housing with screws on mounting plate,
making sure to align red dot with screw
hole on side of motor housing.
groove
Twist motor housing clockwise until it
large screw
clicks.
Re-install the large screw that was
motor housing
previously removed from mounting plate
screw hole
(Step 5, page 4) on side of motor housing to
secure motor housing.
page 5