10. Automated Learning Process./Activating Code.
remote control
1-6
2
1
REVERSE
UP BULB
DOWN BULB
ON/OFF
12V
FRONT
Remove battery cover on front of remote control transmitter.
Install 12-volt battery (provided) in transmitter and wall control (if applicable).
IMPORTANT: Store the transmitter away from excess heat or humidity. To prevent damage to transmitter,
remove the battery if not used for long periods.
Fan SPEED control buttons 1-6:
REVERSE:
CODE SWITCHES and LEARN button: With fan power off, arrange CODE SWITCHES to desired code
UP LIGHT:
DOWN LIGHT:
ON/OFF:
Replace the battery cover on transmitter.
All manuals and user guides at all-guides.com
IMPORTANT:
3 4
If you prefer to use both,
5
the remote and wall
6
controls, they must be
SYNCHRONIZED with
fan in order to
properly function.
LEARN
Use to control the ceiling fan speed 1-6
Use to control fan direction
setting. Turn fan power on, press and hold LEARN button on front
of remote control and on wall control (if applicable) for 5 seconds
within 60 seconds of powering fan in order to synchronize with fan
motor.
Use for up-light (if applicable).
Use for down light.
Use to turn transmitter on or off.
IMPORTANT:
The code switches in
remote and wall
controls MUST MATCH
for fan to function
properly when you are
using both controls.
page 7
wall control (optional)
3 4
2
5
1
6
12V