Installing / Removing The Battery Pack; Battery Pack And Charger; Battery Charging - Craftsman 151.98834 Manual Del Usuario

Ocultar thumbs Ver también para 151.98834:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

INSTALLING / REMOVING THE
BATTERY PACK
See Figures 16-17, page iv
WARNING
If any parts are broken or missing, do not
attempt to attach the battery pack to the
mower or operate the mower until the broken
or missing parts are replaced. Failure to do so
could result in serious injury. Do not connect
the battery and/or the safety key before the
product is completely assembled.
To install battery pack:
■ Align the groove on each side of the battery
with the edges of the terminal plate in the
compartment.
■ Slide the battery pack onto the terminal
plate until it secures into place.
■ Do not use force when inserting the battery
pack. It should slide into position and "click."

BATTERY PACK AND CHARGER

BATTERY CHARGING

■ Use only with 60V Craftsman battery
chargers. The battery charger supplied is
specifically designed for the Lithium-Ion
battery used in this tool.
■ Check the power voltage! Battery chargers
operate on 120 V.
■ Charge the battery between 35.6°F and
109.4°F. This ensures an optimum battery
service life.
ASSEMBLY
■ Close the battery compartment cover (8).
Make sure that the safety key is inserted into
the front corner of the compartment before
closing cover.
NOTE: Make sure that battery pack firmly
snaps into place and is secured to the mower
before starting operation.
To remove battery pack:
■ Stop the machine. Lift the battery
compartment cover (8) and remove the safety
key (19).
■ Press the release button on the battery
pack (21), grasp the battery pack firmly and
pull out of the battery compartment (Fig. 16).
■ Close the battery compartment cover (8)
(Fig. 17).
■ Protect the battery from heat, from
continuous exposure to sun and keep away
from radiation or other heat sources. Do not
leave the battery in the tool in direct sunlight
over long periods.
■ The battery is supplied uncharged. Fully
charge the battery before using the tool for
the first time. The Lithium-Ion battery can
be charged at any time without reducing
its service life. Interrupting the charging
procedure does not affect the battery.
14 ― English
Tabla de contenido
loading

Tabla de contenido