Manual Functions - AL-KO E.C.S 12 Manual Del Usuario

All manuals and user guides at all-guides.com
Explanation of symbols for the following text (Manual functions):
Symbol „->" means:
The buttons are to be pushed one after the other (not at the same time!)
The time between pushing the first and second button must not be longer than two seconds. If
the wait is longer, the function is not carried out.

Manual functions

Manually retracting the steady
+
button 1....4 -> button
Manually lowering the steady
+
button 1....4 -> button
"Learning" Function
The remote control is coded. I.e. only your remote control can operate your E.C.S – control unit.
Should the remote control be faulty, stop functioning or be lost, then the E.C.S.-Control unit must
learn the code of the new remote control, in order to be able to carry out the functions.
Procedure as follows:
1. Insert the batteries in the battery compartment of the remote control.
Carry out a function test.
To do this, push any button on the hand transmitter.
The green LED in the hand transmitter must light up when the button is pressed.
2. Push the button on the control
After approx. 3 seconds the red LED "Power on"
Briefly push the respective number button (1, 2, 3, 4) then button
The support selected previously is moved in so long as the button (con-
stant pulse button) is pushed.
The supports can only be raised individually in this manual function.
Briefly push the respective number button (1, 2, 3, 4) then button
The steady previously selected is lowered as long as the button (constant
pulse button) is depressed.
The steadies can only be individually lowered in this manual function.
and hold it in
16
this position until point 3.
starts to flash every 0.5 seconds
.
.