AL-KO E.C.S 12 Manual Del Usuario página 31

All manuals and user guides at all-guides.com
foto 9
M5 inbusbout
Install the 4 connecting cables in accordance with the installation diagram (Fig. 10).
Attach the cables to the under side floor of the caravan, using the cable clamps provided.
Connecting cable no. 1 on the steady leg - front left
Connecting cable no. 2 on the steady leg - front right
Connecting cable no. 3 on the steady leg - rear left
Connecting cable no. 4 on the steady leg - rear right
foto 10:
Fitting the connecting cable
The connecting plug cables (1, 2, 3 or 4) can
only be fitted from a specified side.
The motor plug is coded and can only be
inserted in one position.
Push the rubber seal on the plug! Screw the plug
tight to the emergency unlocking plate with the M5
hexagon socket screw using the SW3 fixed span-
ner!
Do not over-tighten the plug!
A distance of 0.1 – 0.3 mm must be left between
the motor plug and the screw head! It must be
possible to move the motor plug in all directions!
7