BFT SB300 Instrucciones De Uso Y De Instalacion página 21

Menu B
Menu C Menu C - QSC CONTROL UNIT MEMORY CANCELLATION
Simultaneously press
control unit keys
SW1 and SW2
3 times and release
Press P1 on the
SW1
1
transmitter to be
SW2
cancelled
(see fig. 1A)
SW1
2
SW2
Green
SW1
3
Red
SW2
Alternate blinking
Green-Red
1 1 1 1
Total cancellation of QSC
transmitter memory and
modifications
(only data set by
manufacturerleft)
Menu A
All manuals and user guides at all-guides.com
PROGRAMMING
To cancel another T key from the transmitter itself or another transmitter
Press T1,T2,T3 or T4
Cancellation
to be cancelled from
of START
QSC memory
(see fig. 2A)
Alternate blinking
on memorised
Green-Red
transmitters
1
1 1
SW1
Press SW1
2nd CHANNEL
on control unit
cancellation
on memorised
Green On emits
transmitters
1 blink
Red Off
Simultaneously press SW1 and
SW1
SW2 for 10 seconds on QSC
SW2
control unit
Green On, emits 1 blink
Red Off
Key T on the
transmitter, Wait for 60s
memorised as
[START] programming
is cancelled or disconnect
from QSC
memory
1
Press T1,T2,T3 or T4
to be cancelled from
QTELEC memory
(see fig. 2A)
Alternate blinking
Green-Red
1
1 1 1
All memorised transmitters are cancelled
and all QSC parameters modified.
Only parameters set by manufacturer
are left and specified in paragraphs
"Function logic settings" between
1
square brackets [ ].
ENGLISH
Open jumper
at the end
to exit
of programming
OFF
supply
Key T on the
transmitter, Wait for 60s
memorised as
[2 CHANNEL] programming
is cancelled or disconnect
from QSC
memory
1
SB300 (433) - Ver. 03 -
J1
to exit
supply
21