Cycle Guide - Kenmore 6800 Manual De Uso Y Cuidado

Not all cycles and settings are available on all models. Settings and options shown in bold are default settings for that cycle.
AUTO DRY -
Senses moisture in the load or air temperature and shuts off when the load reaches the selected dryness level.
Depending on model, temperature may be selected on cycle knob or be a separate control.
Items to dry: Cycle:
Sanitize
Towels, bedding,
children's clothing, or
other items needing to
be sanitized
Heavy Duty
Jeans, heavy work
clothes, towels
Bulky
Jackets, comforters,
cotton or polyester
fiber filled pillows.
Normal
Work clothes, medium
weight fabrics, sheets
Casual, shirts, pants, Casual
lightweight items,
synthetics, delicates,
athletic wear
Delicates
Lingerie, exercise wear,
washable woolens
NOTE:
If loads do not seem as dry as you would like, set the Dry Level to More the next time you dry a similar load. If load seems drier than you like,
set the Dry Level to Less the next time you dry a similar load.
Not all cycles and settings are available on all models. Settings and options shown in bold are default settings for that cycle.
TIME/EXPRESS DRY -
Will run the dryer for the specified time on the control. Depending on model, temperature may be selected
on cycle knob or be a separate control.
Items to dry: Cycle:
Any load Time Dry
Rubber, plastic, heat Time Dry
sensitive fabrics
Small loads and Time/Express
workout clothes
(2-3 items)
6
CYCLE GUIDE-AUTO DRY CYCLES
Dry
Temp:
High
High
Medium High
Medium
Low
Low
CYCLE GUIDE-TIME CYCLES
Drying
Temperature:
Any
Air Only
High/Low
Dry
Dry
Default
Level: Cycle Time:
More
50
Normal
Wrinkle Guard™
Less
More 40
Normal Wrinkle Guard™
Less
More
35
Normal
Wrinkle Guard™
Less
More 25
Normal
Wrinkle Guard™
Less
More 60
Normal Wrinkle Guard™
Less
More
55
Normal
Wrinkle Guard™
Less
Default Cycle Available
Time: Options:
40 Dry Temp
Wrinkle Guard™
Less/More Time
40 Wrinkle Guard™
Less/More Time
23 Dry Temp
Wrinkle Guard™
Less/More Time
Available
Cycle Details:
Options:
This cycle is designed
Damp Signal
to eliminate 99.9% of
3 common infectious
Cycle Signal
bacteria. This cycle should
Dry Temp
be run to completion
to ensure sanitization.
For best results, do not
interrupt this cycle.
Damp Signal For drying large or heavy items.
Cycle Signal
Dry Temp
Damp Signal Evenly dries large or heavy loads.
Cycle Signal
Dry Temp
Medium to large loads of mixed
Damp Signal
fabrics and items.
Cycle Signal
Dry Temp
Damp Signal
For normal light- to medium-weight
fabrics. Drying time varies based on
Cycle Signal
fabric type, load size, and dryness
Dry Temp
setting.
Damp Signal
For gently drying delicate items.
Cycle Signal
Dry Temp
Cycle Details:
Dries items to a damp level for items that
do not require an entire drying cycle.
Select a drying temperature based on
the fabrics in your load. If you are unsure
of the temperature to select for a load,
select the lower setting rather than the
higher setting.
Use a no heat (Air Only) setting for foam,
rubber, plastic, or heat-sensitive fabrics.
For small loads of 2-3 items.