Tabla De Contenido; Check Your Vent System For Good Air Flow; Use Evenheat™ Auto Dry Cycles For Better Fabric Care And Energy Savings - Kenmore 6800 Manual De Uso Y Cuidado

Ocultar thumbs Ver también para 6800:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Table of Contents
DRYER SAFETY ..................................... 2
FOR GOOD AIR FLOW .....................4
AND FEATURES .................................... 5
CYCLE GUIDE .......................................6
USING YOUR DRYER ..........................7
DRYER CARE .........................................9
TROUBLESHOOTING ........................ 12
PROTECTION AGREEMENTS` ......... 14
WARRANTY ........................................ 14
ASSISTANCE OR SERVICE .............. 44
WARNING
Use a heavy metal vent.
Do not use a plastic vent.
Do not use a metal foil vent.
Failure to follow these instructions can result in death
or fire.
Good Air Flow
Along with heat, dryers require good air flow to efficiently
dry laundry. Proper venting will reduce your drying times
and improve your energy savings. See "Installation
Instructions".
The venting system attached to the dryer plays a big role
in good air flow.
Service calls caused by improper venting are not covered
by the warranty and will be paid by the customer, regardless
of who installed the dryer.

USE EvenHeat™ AUTO DRY CYCLES FOR BETTER FABRIC CARE AND ENERGY SAVINGS

Use the Evenheat™ Auto Dry Cycles to provide the most energy savings and enhanced fabric care from the dryer. During
Evenheat™ Auto Dry Cycles, drying air temperature and moisture level are sensed in the load. This sensing occurs throughout
the drying cycle and the dryer shuts off when the load reaches the selected dryness. Choose Normal to save energy.
With Time Cycles, the dryer runs the amount of time set and sometimes results in shrinkage, wrinkling, and static due
to over-drying. Use Time Cycle for the occasional damp load that needs a little more drying time or when using the drying rack.
4
Índice
DE LA SECADORA ........................... 15
UN BUEN FLUJO DE AIRE ................ 17
AUTOMATICOS PARA UN
MEJOR CUIDADO DE LAS TELAS
Y AHORRO DE ENERGIA ................ 17
Y CARACTERÍSTICAS ....................... 18
GUIÁ DE CICLOS .............................. 19
USO DE LA SECADORA ................. 21
GARANTÍA ........................................28

CHECK YOUR VENT SYSTEM FOR GOOD AIR FLOW

Fire Hazard
Table des matières
D'ÉVACUATION ..................................31
AUTOMATIQUES POUR UN
MEILLEUR SOIN DU TISSU ET
DAVANTAGE D'ÉCONOMIES
D'ÉNERGIE ...........................................31
ET CARACTÉRISTIQUES ...................32
GUIDE DE PROGRAMME ................33
DÉPANNAGE ..................................... 40
GARANTIE ......................................... 42
ASSISTANCE OU SERVICE ............. 44
Maintain good air flow by:
Cleaning your lint screen before each load.
n
Replacing plastic or foil vent material with 4" (102 mm)
n
diameter heavy, rigid vent material.
Using the shortest length of vent possible.
n
Using no more than four 90° elbows in a vent system;
n
each bend and curve reduces air flow.
Good
Removing lint and debris from the exhaust hood.
n
Removing lint from the entire length of the vent system
n
at least every 2 years. When cleaning is complete,
be sure to follow the "Installation Instructions" supplied
with your dryer for final product check.
Clearing away items from the front the dryer.
n
Better
Tabla de contenido

Solución de problemas

loading

Este manual también es adecuado para:

7800C6801

Tabla de contenido