Measuring - Faro GAGE Guia De Inicio Rapido De La Computadora Y El Software

Follow the on-screen pictures, touch the part with the probe and press a
button to measure.
1. The Green button is used to take points on the part and the Red button
ends the feature measurement. The Esc key cancels the Feature.
2. The FARO Gage uses a ball probe. To compensate the measurements
for the ball probe radius, points must be digitized off the feature. Look
at each illustration to see the location of the Red Ball.
Note: A results screen appears when a measurement is complete and
out of tolerance.
3. A results screen appears when the Tool is complete.
4. Enter your Nominal and Tolerance information. This is optional.
5. Touch the Add to Report check box to remove the feature from the
report.
6. Touch OK to complete the measurement, Remeasure to remeasure
the feature or Cancel to discard the measurement.
Choose more FARO Gage Tools to complete your part.
M
eaSuring
P e-7
age
Gage mode