Troubleshooting - koban PS-RS16 Guia De Inicio Rapido

Detector de presencia

Ocultar thumbs

Tabla de contenido

Idiomas disponibles

KOBAN

Reach setting (sensitivity)

Reach is the term used to describe the radii of the more or less circular detection zone

produced on the ground after mounting the sensor light at a height of 2.5m, switch to the

on is "1", switch to the off is "0";The corresponding file of switch location and detection

distance

SENS:S1,S2

NOTE: The above detection distance is measured using a person who is between

1.6m~1.7m tall with an average build, moving at a speed of 1.0~1.5m/sec. if any of

these variables are changed, the detection distance will also resultantly change.

Time setting

Time can be set 10s to 30min.Any movement detected before this time elapse will re-start

the timer. It is recommended to select the shortest time for adjusting the detection zone

and for performing the walk test. Switch to the on is "1", switch to the off is "0"; the

corresponding file of switch location and detection distance as follow:

TIME:S3,S4,S5

NOTE: after the light switches OFF, it takes approx. 1sec before it is able to start detecting

movement again. The light will only switch on in response to movement once this period

has elapsed.

Light-control setting

The chosen light response threshold can be infinitely from approx. 10lux-500lux. switch

to the on is "1", switch to the off is "0"; he corresponding file of switch location and

detection distance as follow:

LUX:S6,S7,S8