2.3 HELMET COMPARTMENT
• Placed under the saddle.
To reach it, place the vehicle on its stand, then insert the ignition
key and turn it anticlockwise (Fig. 9) as to unlock the saddle. Tilt
the saddle upwards and place the helmet as shown in Fig. 9.
• The helmet compartment can contain a normal helmet. Anyway,
some special helmets might not be fitted into the helmet
compartment. Therefore, before purchasing the vehicle, we
recommend you check whether your helmet fits into the
compartment.
Note: the helmet compartment can be used to carry light
objects.They must be stored in such a way as not to compromise
the vehicle stability while riding. Do not store too heavy objects
which are not temperature-resistant (for example lighters,
inflammable liquids, perishable goods, etc). Do not leave
documents or valuables inside the helmet compartment.
S
Fig. 9
All manuals and user guides at all-guides.com
2.4 STAND
Main stand
• The main stand position is not electronically controlled, so you
can start the engine with the vehicle standing.
• To place the scooter on the centre stand (1 - Fig. 10), push the
lever (A) and raise the vehicle by the handle at the left rear side of
the saddle.
• Before using the motorbike, always check that the stand is
properly closed.
S
We suggest to frequently check the holding system of
both stands, that is their tension springs.
Do not sit on the scooter when it is parked on the stand.
Fig. 10
EN
A
1
11