Storage - Schumacher Electric INSTANT POWER IP-55 Manual Del Usuario

All manuals and user guides at all-guides.com
3. Plug the 12V DC device into the DC power outlet, and turn the 12V DC
device on (if required).
4. If the 12V DC device draws more than 15A or has a short circuit, the
internal circuit breaker of the Instant Power™ will trip and disconnect the
power to the device. Disconnect the 12V DC device. The breaker will
automatically reset after an overload occurs.
The DC power outlet is wired directly to the internal battery. Extended
operation of a 12V DC device may result in excessive battery drain. Recharge
immediately after unplugging the 12V DC device.
Appliance Type
Cell Phone
Fluorescent Light
Radios, Fan
Depth Finder
Camcorder, VCR
Electrical Tool
Electrical Cooler
Car Vacuum, Air
Compressor
NOTE: Estimated run-times. Actual time may vary. Times are based on the
internal battery being fully charged
5.

STORAGE

IMPORTANT:
• CHARGE IMMEDIATELY AFTER PURCHASE
• KEEP FULLY CHARGED
Charge the Instant Power™ internal battery immediately after purchase, after
every use and every 30 days.
All batteries are affected by temperature. The ideal storage temperature is
at 70 degrees Fahrenheit. The internal battery will gradually self-discharge
(lose power) over time, especially in warm environments. Leaving the battery
in a discharged state may result in permanent battery damage. To ensure
satisfactory performance and avoid permanent damage, charge the internal
battery every month.
The clips on the Instant Power™ are live and will produce arcing or sparking
if they come in contact with each other. To prevent accidental arcing, always
keep the clips on the storage holders when not using it to jump start a vehicle.
Estimated Wattage
4 watts
4 watts
9 watts
9 watts
15 watts
24 watts
48 watts
80 watts
5
• •
Estimated Usage Time
15 hours
15 hours
6 hours
6 hours
4 hours
2.5 hours
1.3 hours
0.8 hours