Specifications - Bair Hugger 750 Manual Del Usuario

18

Specifications

Physical Characteristics
dimensions
weight
relative noise level
hose
filtration system
recommended filter change
mounting
Temperature Characteristics
recommended operating environment
temperature control
heat generated
operating temperatures
Safety System
thermostat
alarm system
overcurrent protection
Bair Hugger Model 750 Temperature Management Unit Operator's Manual
12�5" high x 13�5˝ deep x 10˝ wide
31�5 cm high x 34 cm deep x 25 cm wide
16�3 lb (7�4 kg)
55 dBA
Flexible, compatible with the Bair Hugger brand 241
blood/fluid warming system�
0�2 µm air filter
Every 6 months or 500 hours of use�
Can be clamped to an IV pole, placed on a hard
surface, or mounted to the rolling stand accessory�
15°C-25°C
Electronically controlled�
1644 BTU/hr (average), 482 W (average)
Average temperatures at the end of the hose:
HIGH: 43° ± 1�5°C
MED: 38° ± 1�5°C
LOW: 32° ± 1�5°C
Independent electronic circuit; thermal cut-off shuts
the heater OFF at preset high temperature of 53°C ±
3°C at the end of the hose, back-up over-temperature
detection at hose inlet�
Over-temperature (53° ± 3°C ): red Over-temp
indicator light flashes, alarm sounds, heater and
blower shut down, operating indicator lights turn
OFF, control panel becomes unresponsive�
Fault: amber Fault indicator light flashes, alarm
sounds�
Dual input fused lines�
109�4° ± 2�7°F
100�4° ± 2�7°F
89�6° ± 2�7°F