Overview And Operation; Unit Power-On Reset - Bair Hugger 750 Manual Del Usuario

10

Overview and Operation

Alphanumeric
display
User interface
IV pole clamp
Figure A� Model 750 temperature
management unit – front view
Unit Power-On-Reset
The Model 750 temperature management unit proceeds through the following power-on-
reset sequence after you connect the unit to a grounded power source:
• Performs all self-test functions�
• Illuminates indicator lights and all pixels in the alphanumeric display momentarily�
• Displays the text "BH 750" and the software revision level in the alphanumeric display�
• Sounds the alarm (three low-level clicks)�
• Enters the
If the temperature management unit loses power for less than 1 second, the unit's software
will return the unit to the operating mode you selected prior to the power loss� However, if
the temperature management unit loses power for longer than 1 second, the unit's software
will reset when you restore power� The unit will then enter the Standby mode�
Bair Hugger Model 750 Temperature Management Unit Operator's Manual
Carrying handle
IV pole
stabilizer
Standby mode�
Power cord
retainer
Power cord
Hose outlet
inlet
Figure B� Model 750 temperature
management unit – rear view
Hose
Labels