Environmental Protection - BGS technic 8262 Guia De Inicio Rapido

USE
Assembling of drive shaft stub with outer thread
Insert the drive shaft stub (B) into the gearing of the wheel
hub (B).
Choose a suitable spindle for the outer thread (1-7) and
screw it onto the outer thread of the drive shaft.
Slide the support sleeve with the large inner diameter (12)
onto the spindle.
Mount the spindle nut (10) onto the spindle.
By turning the spindle nut, the drive shaft is pulled into the
gearing.
CAUTION: Make sure for the correct seating of the
gearing.
Assembling of drive shaft stub with inner thread
Insert the drive shaft stub (B) into the gearing of the wheel
hub (B).
Choose a suitable spindle for the inner thread (8/9) and
screw it into the inner thread of the drive shaft.
Slide the support sleeve with the smaller inner diameter
(11) onto the spindle.
Mount the spindle nut (10) onto the spindle.
By turning the spindle nut, the drive shaft is pulled into the
gearing.
CAUTION: Make sure for the correct seating of the
gearing.

ENVIRONMENTAL PROTECTION

Recycle unwanted materials instead of disposing of them as waste. All tools, accessories
and packaging should be sorted, taken to a recycling centre and disposed of in a manner
which is compatible with the environment. Contact your local solid waste authority for
recycling information. Dispose of this product at the end of its working life environmentally.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
[email protected]
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed