Troubleshooting - Casio Privia PX-500L Guia Del Usuario

Troubleshooting

Symptom
No sound produced when
keyboard keys are pressed.
Keyboard keys remain lit.
Keyboard keys light but no sound
is produced.
Keyboard out of tune.
No sound produced by demo tune
play.
Memory contents deleted.
No sound produced by connected
external MIDI sound source when
the digital piano keys are pressed.
414A-E-027A
PX500L_e_16-27.p65 25
All manuals and user guides at all-guides.com
Possible Cause
1. VOLUME knob set to MIN.
2. Headphones connected to the
digital piano.
3. Local Control turned off.
4. Check the current
accompaniment mode setting.
Normally, the accompaniment
keyboard will not produce any
note while CASIO CHORD or
FINGERED is selected as the
accompaniment mode.
The piano is standing by for
keyboard play in Easy Lesson.
Power on alert is telling you that
power is left on.
1. The piano key is set to a value
other than C.
2. Incorrect pitch setting of the
piano.
1. VOLUME knob set to MIN.
2. Headphones connected to the
digital piano.
Lithium battery is dead.
1. The digital piano Send Channel
does not match the Send Channel
of the MIDI sound source.
2. Volume or expression setting of
the external sound source is set
to 0.
Action
1. Move the VOLUME knob more Page E-6
towards MAX.
2. Disconnect the headphones Page E-5
from the digital piano.
3. Turn on Local control. Page E-24
4. Change the accompaniment Page E-12
mode to NORMAL.
1. Press the lit keys and continue Page E-18
with Easy Lesson play.
2. Press the PLAY/STOP button to
stop Easy Lesson.
Press any button or keyboard key Page E-4
to resume normal operation with
the keyboard in its initial power on
setting.
1. Change the piano key setting to Page E-22
C, or turn the digital piano
power off and then back on
again.
2. Correct the pitch setting, or turn Page E-22
the digital piano power off and
then back on again.
1. Move the VOLUME knob more Page E-6
towards MAX.
2. Disconnect the headphones Page E-5
from the digital piano.
Contact your CASIO Service Page E-27
Provider for replacement of the
lithium battery.
1. Change the Send Channel Page E-24
settings so they are identical.
2. Change the volume or
See the
expression setting of the
documentation
external sound source to an
that comes with
appropriate value.
the external
sound source.
03.7.31, 0:14 PM
Reference
E-25