Setup Outline - Canon PIXMA MP600R Manual De Instrucciones

Setup Outline

Follow the steps below to start using the machine.
Step 1
There are several ways to connect the machine and your computer.
Decide on a connection type that matches your network environment.
Step 2
Place the machine and install the print head and the ink tanks.
Even though the machine is intended to be used over a wireless or wired LAN, it must be placed
temporarily near the computer to do the setup with a USB cable.
Step 3
Setup procedure varies depending on your connection type.
Decide on a setup procedure that matches your connection type.
Step 4
(for Windows
Install the driver to use the machine and the software to connect it to a network.
If you are using the machine over a wireless or wired LAN, place it in the location where you will
Setup complete
4 Preface
Confirming Your Connection Type. (see page 5)
Preparing the Machine. (see page 10)
Confirming the Setup Environment. (see page 20)
Setting Up the Machine and the Computer.
®
see page 24, for Macintosh
use it as instructed during setup.
The machine is now ready for use.
®
see page 42)