Select An Aspect Ratio; Setup Button; Cursor Buttons; Setup - Rotel RVE-1060 Manual De Instrucciones

To select an output mode from the
remote:
Press one of the four OUTPUT buttons on
the remote.
: Either the 480p or 575p option will be
NOTE
available, depending on whether the source
input is NTSC or PAL standard. Use the 480p
button on the remote with an NTSC source;
use the 576p button with a PAL source.
To select an output mode from the
front panel:
Press the OUTPUT button to step through the
available options.
The current selection is shown on the SYSTEM
STATUS screen of the ON-SCREEN DISPLAY
and by LEDs above the OUTPUT button on
the front panel.

Select an Aspect Ratio

The RVE-1060 can use advanced stretch mode
algorithms to stretch a 4:3 aspect ratio video
signal to fill a 16:9 widescreen TV.
Press the ASPECT button on the remote to
toggle between the 4:3 aspect ratio and
16:9 aspect widescreen display.
: The RVE-1060 cannot convert wide-
NOTE
screen aspect video to 4:3 aspect ratio.

Setup Button

Press the SETUP button on the remote to ac-
cess the SETUP menus. See the following
section of the manual.

Cursor Buttons

The CURSOR buttons and the ENT button on
the remote are used to navigate the SETUP
menus. See the following section of the man-
ual for details.
All manuals and user guides at all-guides.com
19

SETUP

The RVE-1060 features two types of informa-
tion displays to help operate the system. The
first consists of simple status displays that ap-
pear on the TV screen are changed. These
status displays are self-explanatory.
A more comprehensive ON-SCREEN DISPLAY
(OSD) menu system is available at any time
by pressing the SETUP button on the remote.
These OSD menus guide you through the
configuration of the RVE-1060. In general,
the settings made in the configuration pro-
cess are memorized as default settings and
need not be made again for normal opera-
tion of the unit.
Configuring Menus for
NTSC or PAL Monitors
The OSD menu system is configured at the
factory for display on NTSC TV monitors. To
use the RVE-1060 with PAL TV monitors, you
must change the menu configuration:
To reconfigure from NTSC mode to
PAL mode:
1. Press and hold the OUTPUT button on
the front panel for several seconds. The
OUTPUT LEDS above the button will begin
flashing rapidly, indicating PAL mode.
2. Press the STANDBY button on the front
panel to store the new setting.
To reconfigure from PAL mode to
NTSC mode:
1. Press and hold the OUTPUT button on
the front panel for several seconds. The
OUTPUT LEDS above the button will begin
flashing slowly, indicating NTSC mode.
2. Press the STANDBY button on the front
panel to store the new setting.

Menu Basics

Navigation Buttons

The following remote control buttons are used
to navigate the OSD menu system:
ENT ENT
SETUP
SETUP button: Press to display the SYSTEM
STATUS screen. From the SYSTEM STATUS
screen, press the ENT button to display the
MAIN MENU screen which has links to all
other menus. If a menu is already visible, push
this button to cancel the display.
DOWN/UP Buttons: Press to move up and
down in the lists of menu items that appear
on the OSD screens.
LEFT/RIGHT Buttons: Press to change the
current settings for a selected menu item on
OSD screens.
ENT Button: From the SYSTEM STATUS
screen, press ENT to display the MAIN MENU
screen. From any other OSD screen, press ENT
to confirm a setting and return to the MAIN
menu or to EXIT the menu system.
English