Working Procedures; Working With The Clamp; Working With A Tripod - Parkside PKLL 7 A1 Instrucciones De Uso

Working procedures

■ Use only the centre of the laser line to make your marking.
The width of the laser line changes with the distance .

Working with the clamp

With the help of the clamp
various items, e .g . vertical or horizontal boards or pipes .
♦ Undo the fixing screw
♦ Position the clamp
the fixing screw
♦ Now place the appliance with the tripod thread
screw
tighten the appliance as it could be damaged .
♦ Align the clamp to roughly the position you require before you
switch on the appliance .
♦ To do this, undo the locking screw
to a horizontal position at the desired height .
♦ Retighten the locking screw

Working with a tripod

A tripod offers a stable, height-adjustable support for taking measure-
ments .
♦ Place the measuring tool with the tripod thread
screw of the tripod .
■ 16 │
US–EN
you can attach the measuring tool to
.
in the desired location and then retighten
.
and screw it tight with moderate force . Do not over-
and move the appliance
.
on the
on the 1/4"
PKLL 7 A1