Safety Instructions; Symbols And Icons; General Safety Instructions For Power Tools - Parkside PBHA 12 A1 Traducción Del Manual De Instrucciones Original

GB MT
Warning: The vibration emission
value may differ during actual use of
the power tool from the stated value
depending on the manner in which
the power tool is used.
Try to keep the exposure to vibrations
as low as possible. An example of how
to reduce vibration exposure is limiting
the working hours. For this purpose all
parts of the operating cycle have to be
considered (for example, times when
the electric tool is switched off and
times when it is switched on but run-
ning without any load).

Safety instructions

Ensure that the safety instructions are ob-
served when operating the appliance.

Symbols and icons

Symbols on the appliance:
Carefully read these operating in-
structions.
Wear personal protective equip-
ment. Wear eye protection!
Wear hearing protection!
Wear a dust protection mask!
This device is part of the Park-
side X 12 V TEAM series
Electrical appliances must not be
disposed of with the domestic
waste.
The impact drilling function must not
be used when the keyless chuck is
attached.
48
Symbols in the manual
Warning symbols with in-
formation on damage and
injury prevention.
Hazard symbol with infor-
mation on the prevention of
personal injury caused by
electric shock.
Instruction symbols with information
on preventing damage.
Help symbols with information on
improving tool handling.
General safety instructions
for power tools
WArNING! read all safety
notices, instructions, illustra-
tions and technical data that
have been provided with this
power tool. Omissions in the
compliance with safety directions
and instructions can cause electrical
shock, fire and/or severe injuries.
retain all safety directions and in-
structions for future use.
The term "Power Tools" used in the safety
instructions refers to mains-operated power
tools (with power cord) and to battery-op-
erated power tools (without power cord).
1) WorK ArEA SAFETy
a) Keep work area clean and well lit.
Cluttered or dark areas invite accidents.
b) Do not operate power tools in
explosive atmospheres, such as
in the presence of flammable
Iiquids, gases or dust. Power tools