Tabla de contenido
Idiomas disponibles
Idiomas disponibles
COMPONENTS
1
Gear retaining plate, to be used as OEM MOT 1509
2
Gear, to be used as OEM MOT 1509-01
3
Gear, to be used as OEM MOT 1509
4
Nut (Retaining plate), to be used as OEM MOT 1509
5
Distance sleeve, to be used as OEM MOT 1509
6
Washer (Gear), to be used as OEM MOT 1509
7
Nut (Gear), to be used as OEM MOT 1509
SAFETY INFORMATIONS
Do not use the tool if parts are missing or damaged.
•
•
Use the tool for the intended purpose only.
Never place the tool on the vehicle battery. There is a risk of a short circuit.
•
Be careful when working on running engines. Loose clothing, tools and other objects can be
•
caught by rotating parts and cause serious injury.
Keep children and other unauthorized persons away from the work area.
•
Do not allow children to play with the tool or its packaging.
•
•
Be careful when working on hot engines because of the risk of burn injuries.
If you remove the ignition key before repairing, you can prevent the engine from being started
•
accidentally and resulting in engine damage.
•
This manual serves as a brief guide and does not replace a workshop manual. Always refer to
the vehicle-specific service literature, particularly the technical data such as torque values and
instructions for disassembly/assembly, etc.
After repair or before starting the engine, turn a minimum of 2 turns by hand and check the
•
timing again.
Turn the engine only in the normal direction of rotation (clockwise unless otherwise specified)
•
Do not use locking tools for camshaft and crankshaft as a counter-holder, during loosening or
•
tightening screws on pulleys, camshafts or crankshafts. This can damage tools and engine
components. Only use tools that are suitable for this purpose.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Camshaft Locking Tool
for Renault 1.8 / 2.0 16V
Tel.: 02196 720480
Fax.: 02196 7204820
BGS 8577
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Tabla de contenido
