Mettler Toledo GPro 500 Guía De Instalación Rápida página 24

Quick Setup Guide TDL GPro 500
24
Note: Always take great care when choosing the measurement location.
Positions where there are fewer particles, the temperature is lower or
there is a more suitable process pressure, are recommended. The more
optimized the measurement location is, the better the overall perfor-
mance of the system will be. For advice on the optimal measurement
location, please contact your local METTLER TOLEDO representative.
Solar radiation and process radiated heat.
Exposure of the head of the GPro 500 to very high temperatures, for ex-
ample, solar radiation and / or excessive localized heat sources (such
as radiated heat from process walls or adjacent equipment) can cause
internal overheating of the device. See manual for further information.