Avoid risk
of injury
Do not change the accessories
while the product is switched on.
Do not use the product if you
detect any kind of visible, external
damage. Never use a damaged
product.
If liquid gets into the product,
check before using the product
once more.
If you notice that the supply
cord, plug, housing or another
part has become damaged, the
product can no longer be used.
Repairs should only be carried
out by a specialist. Improper re-
pairs may result in considerable
danger to the user. This will also
make any warranty claims void.
Do not use defective attachments
with the product as these could
have sharp corners.
Defective components must
always be replaced with original
spare parts. Only by using origi-
nal spare parts can you ensure
that safety requirements are met.
Connect plug to an outlet which
is well within reach.
Never use the product unsu-
pervised and only use it in
accordance with the information
stated on the type plate.
The tips of the attachments are
sharp.
Switch off the product before
attaching or switching the attach-
ments, as well as before cleaning.
Lay the supply cord so nobody
will step on or trip over it.
Do not use the product on open
wounds, cuts, sunburns and
blisters.
Avoid the danger of
damage to property
Electrical products may pose a
hazard to animals. Animals can
also damage the product. Always
keep animals away from electrical
products when it is not in use.
Protect the product from moisture,
drops of water and splashing
water.
Ensure that the supply cord does
not get stuck in cupboard doors
and that it is not pulled over hot
surfaces. This could damage
the supply cord's insulation.
Use the original accessories only.
Do not place the product on
hot surfaces, near hot surfaces
or near an open fire.
GB/IE
19