Basic Flash Modes (A Mode/M Mode) - Sony HVL-MT24AM Manual De Instrucciones

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 120

Basic flash modes (A mode/M mode)

Camera's exposure mode should be set to either A (aperture priority) mode*
(manual) mode*
2
 In general close-up photography, the depth-of-field*
which usually requires a smaller aperture when shooting. It is therefore better to
select A or M mode, which enable you to select the aperture.
Using a macro lens is also recommended.
In this section, the basic flash operation in A or M mode with TTL metering (TTL
lamp on) is described.
The following instructions from the next page assume that you are using one of
the following cameras and macro lenses.
Camera:
A camera with A (aperture priority) mode or M (manual) mode.
Lens:
50mm F2.8 Macro
100mm F2.8 Macro
If you photograph in P mode, refer to page 30. If using a different lens, see the
aperture range graph on page 54.
*
A mode:
1
*
M mode:
2
*
Depth-of-field: The range behind and in front of the subject that is sharply
3

.
In A mode, you select the aperture and the camera
automatically sets the shutter speed required for proper
exposure.
You can select both aperture and shutter speed. You can select a
shutter speed that is slower than the camera's sync speed.
focused. In close-up photography, this range is shallower and
the out-of-focus range is wider.
must be quite shallow,
3
, or M
1
Tabla de contenido
loading

Tabla de contenido