How To Set Up Your Dehydrator; Cleaning And Maintenance - Biochef Arizona Sol Manual Del Usuario

How To Set Up Your Dehydrator

1. Make sure the power switch is turned off. Place the dehydrator on a clean,
dry surface away from children and pets.
2. Plug into an undamaged electrical outlet. Warning: Do not use an
extension cord with your dehydrator.
3. To set temperature and time, see Operating Instructions.
4. Before the first use of your dehydrator, heat the unit at 35°C/95ºF for 45
minutes to remove any moisture.
5. If the unit stops for any reason, turn off, unplug and then repeat Steps 2
and 3. If the unit continues to not operate normally, turn off, unplug and
call Vitality 4 Life.
6. Follow your recipe to prepare the food that you wish to dehydrate.
7. Using oven mitts slide the dehydrator trays out of the unit and load the
product to be dehydrated onto the trays. For best results, do not overlap
the product and be sure to leave space between the items to allow for
maximum air circulation.
8. Using both hands for maximum stability, gently slide the dehydrator trays
back into the unit.
9. Once the door is closed, press the power button and follow the
instructions to set the time and temperature.
10. Moisture may collect on the surface of the food, this can be blotted off
with a paper towel.

Cleaning and Maintenance

• The stainless steel trays are dishwasher safe. The mesh and non stick
sheets are not dishwasher safe. Make sure the trays and drying sheets are
thoroughly dried before inserting them back into the dehydrator.
• To clean the exterior and interior of the main body, use a damp cloth.
EN
5