Functioning Of The Lights (Cm900L/Cm910L) - Moretti Mobility CM900-41 Manual Del Usuario

H. MAIN CIRCUIT BREAKER:
The reset button is close to the seat. (fig.23)
(fig.23) RESET button
The main circuit breaker controls the electric current absorbed by the battery. This is a safety
function of the wheelchair that is included for your safety. When the motor batteries are heavily
stressed (such as by excess charging), the main circuit breaker trips to prevent damage to the
motors and to the electronics. If the automatic circuit breaker trips, wait around one minute
and then press the reset button. Then switch on the control unit and continue with normal
functioning. If the main circuit breaker continues to trip, contact your authorised retailer.

12.1 Functioning of the lights (CM900L/CM910L)

The lights on the electric wheelchair are activated and controlled by the light command
initially positioned on the left side. Press the ON/OFF button to switch on the light command
and activate any type of light. Use the light-blue button to switch on the front and rear lights
and press the same button again to switch them off. Press one of the two green arrow buttons
to switch on the direction indicators. Press the same button again to switch off the direction
indicator. Press the triangle button to switch on the emergency lights (hazard lights).
Press the same button again to switch them off.
WARNING!
Use of the lights affects the battery and reduces the duration of the batteries,
although to a limited extent.
17