Layering Two Tones; Splitting The Keyboard Between Two Different Tones - Casio CDP-200R Guia Del Usuario

CDP200R_e.book 12 ページ ２００８年４月２１日 月曜日 午後３時４分
Controlling the Keyboard Sounds

Layering Two Tones

You can use the following procedure to layer two different
tones (such as piano and strings) so they sound
simultaneously when you press a keyboard key.
1.
Select the first tone you want to use.
bt cl
Press and then use (10-key) to select the tone you
want.
Example: 026 ELEC.PIANO 1
E . P i a n o 1
2.
ct
Press .
3.
cl
Use (10-key) to select the second tone you
want.
Example: 212 STRINGS
S t r i n
4.
Play something on the keyboard.
Both tones sound at the same time.
5.
ct
Pressing again to unlayer the keyboard (so it
plays only the tone you selected in step 1).
ct
• Each press of toggles between layered (two tones)
and unlayered (one tone).
Disappears
E-12
All manuals and user guides at all-guides.com
Lights
s
g
Splitting the Keyboard between
Two Different Tones
You can use the procedure below to assign different tones to
the right range and left range of the keyboard, so it sounds
like you are playing an ensemble between two instruments.
To select the two tones for a split keyboard
1.
Select the tone for the right side range (page
E-11).
bt cl
Press and then use (10-key) to select the tone you
want.
Example: 335 FLUTE 1
F l u t e 1
2.
cs
Press .
Lights
3.
cl
Use (10-key) to select the left side range tone
you want.
Example: 056 VIBRAPHONE 1
V i b e s 1
4.
Play something on the keyboard.
This will sound the tones assigned to the left and right
side ranges of the keyboard.
VIBRAPHONE 1
Split point
F3
FLUTE 1