How To Use; Starting Operation - Fagor PLV-127 Manual De Instrucciones

interior.qxd 10/4/03
• Power cord can be exchanged only by
authorized repair personnel
• Save these instructions.
NOTES:
• When using the iron for the first time,
test on an old piece of fabric to ensure
the soleplate and water tank are
completely clean.
• The iron may slightly smoke when
switched on for the first time-this is
normal and will soon cease.
• Thank you for purchasing the shot of
steam travel iron. Please read these
instructions carefully before using.

4. HOW TO USE

Move up the handle:
Press the handle lock button down, the
handle will automatically rise to the
upright position.
Fill the water tank
All manuals and user guides at all-guides.com
17:09 Página 16
Place thumb and fore-finger on upper and
lower side of the end of the handle, pull
the water tank button backwards by thumb
to detach the tank from the handle.
Lift the cap from the fill hole on the tank,
and fill with clean water.
Replace the cap to the fill hole, ensuring it
is fastened securely.
Replace the water tank, then lock it in
place by using the water tank button.
Connect plug to an electrical outlet
Stand the iron up on end, turn the
temperature adjustment dial to "MIN" and
connect the plug into an electrical outlet.
Set temperature adjustment dial
Turn the dial until dial adjustment mark is
aligned with the setting corresponding to
the type of fabric to be ironed.
Temperature table
Fabric
Synthetic fibers-Silk
Wool
Cotton - Linen
The iron will reach the appropriate
temperature after about 5 minutes. Test
the iron on the cloth, then iron as usual.
The automatic thermostat will maintain the
correct temperature through use.
For particularly stubborn creases the shot
of steam function can be used if the
14
Temperature
•
• •
• • • (MAX)

5. STARTING OPERATION