6.3
OPERATING PROCEDURES ______________________________________________________
A Roll Over Protection Structure (ROPS) is included with this mower. Seat belts must be worn whenever operating
a mower with a ROPS. Always keep seat belt snugly adjusted. DO NOT use seat belts on a mower without a
ROPS.
If the mower is overturning, hold onto the steering wheel. Do not attempt to jump out or leave the seat.
To help prevent injury, always wear safety glasses, leather work shoes or boots, a hard hat, and ear protection.
1. Under no circumstances should the engine be
started without the operator seated on the mower.
2. Do not operate mower or attachments with loose,
damaged,
or
missing
possible mow when grass is dry.
3. First mow in a test area to become thoroughly
familiar with the operation of the mower and control
levers.
NOTICE
To prevent damage to the reel and bedknife never
operate the reels when they are not cutting grass.
Excessive friction and heat will develop between the
bedknife and reel and damage the cutting edge.
4. Study the area to determine the best and safest
operating procedure. Consider the height of the
grass, type of terrain, and condition of the surface.
Each condition will require certain adjustments or
precautions. Only use accessories and attachments
approved by Jacobsen.
5. Never
direct
discharge
bystanders, nor allow anyone near the machine
while
in
operation.
responsible for injuries inflicted to bystanders and/or
damage to their property.
!
CAUTION
Before mowing, pick up all debris such as rocks, toys,
and wire which can be thrown by the machine. Enter a
new area cautiously. Always operate at speeds that
allow you to have complete control of the mower.
6. Use discretion when mowing near gravel areas
(roadway, parking areas, cart paths, etc.). Stones
All manuals and user guides at all-guides.com
Lift your weight off seat. The engine will shut down.
H
!
WARNING
!
CAUTION
components.
Whenever
of
material
toward
The
owner/operator
discharged from the implement may cause serious
injuries
to
bystanders
equipment.
7. Always move reel levers to Off position to stop
blades when not mowing.
8. Move reel levers to Off position and raise the reels
when crossing paths or roadways. Look out for
traffic.
9. Stop and inspect the equipment for damage
immediately after striking an obstruction or if the
machine begins to vibrate abnormally. Have the
equipment repaired before resuming operation.
Before
you
equipment, always disengage all drives, lower
implements to the ground, engage parking brake,
stop engine, and remove key from ignition switch
to prevent injuries.
10. Slow down and use extra care on hillsides. Read
Section 6.7. Use caution when operating near drop
offs.
is
11. Look behind and down before backing up to be sure
the path is clear. Use care when approaching blind
corners, shrubs, trees, or other objects that may
obscure vision.
12. Never use your hands to clean cutting units. Use a
brush to remove grass clippings from blades.
Blades are extremely sharp and can cause serious
injuries.
OPERATION
and/or
damage
!
WARNING
clean,
adjust,
or
repair
6
the
this
23