Removing The Screen; Installing The Screen; Cleaning The Vaporizer And The Usb-C Cable - STORZ & BICKEL Nighty+ Modo De Empleo

7.2.2 Removing the Screen
X A clogged Screen must be replaced.
X Press in the Screen, using the Filling Chamber Tool along the groove of
the Filling Chamber.
Ö The Screen bulges and detaches from the groove.
X Clean the Screen with rinsing water or isopropyl alcohol.

7.2.3 Installing the Screen

X Curve cleaned or new Screen.
X Insert the Screen into the Filling Chamber with the curved side facing up-
wards.
X Press the Screen flat into the provided groove with the aid of the Filling
Chamber Tool.
7.3 C leaning the Vaporizer and the USB-C Cable
NOTICE
Material damage caused by improper cleaning
Penetration of water into the Vaporizer or the USB-C Cable
• Do not immerse in water or other liquids.
• Do not clean with direct water or steam jet or compressed air
X Switch off the Vaporizer.
X Disconnect the Vaporizer and the USB-C Cable from the mains supply.
X Clean the housing of the Vaporizer and the USB-C Cable only when dry or
with a soft, damp cloth.
7 C L E A N I N G / H Y G I E N E
60