Idiomas disponibles
Idiomas disponibles
All manuals and user guides at all-guides.com
200206186 SmartPro XL Owner's Manual 93-2078.qxd
Quick Installation
1
Connect your UPS to
an electrical outlet.
Your UPS will run a self-test after it is
plugged in. See Basic Operation to understand
the results of its self-test.
2
Plug your computer, monitor
and external modem into
UPS/Surge outlets. Plug
other equipment into
Surge-only outlet(s).
Separate UPS/Surge and Surge-only outlet(s)
are identified on the back of your UPS. Your
UPS is designed to support only computer
equipment. You will overload your UPS if you
connect high power draw equipment such as
household appliances, laser printers or surge
suppressors to its UPS/Surge outlets.
3
Select UPS Operating Mode.*
Press the ON/OFF button to toggle your UPS
between the UPS ("
CHARGE ONLY ("
modes. Choose the operating mode based on
your location:
USA, Canada & Western Europe:
• Leave the UPS in the UPS mode at all times.
All Other Countries:
• Put the UPS in the CHARGE ONLY
mode when you are not using connected
equipment.
(WARNING! When set to "CHARGE ONLY," the UPS
will not provide battery backup during a blackout or
brownout)
• Put the UPS in the UPS mode when you
are using connected equipment.
*See Basic Operation section for a complete explanation
of each mode.
1
2
" LED lit) and the
" LED flashing)
3
3
7/30/02
5:07 PM
Page 3
EXTERNAL
BATTERY
NORM
DELAY
SEE MANUAL FOR
PROPER CONNECTION
Capítulos
