Quick Installation - Tripp-Lite INTERNET OFFICE Serie El Manual Del Propietario

All manuals and user guides at all-guides.com

Quick Installation

Plug your UPS into an
1
electrical outlet.
Plug your computer,
2
monitor and external
modem into battery-
supported outlets.
Plug other equipment
into surge-only outlets
of your UPS.*
Optional (All models)**
Using telephone cords, connect your
wall jack to the UPS jack marked
"LINE" (or "IN"). Connect your
equipment to UPS jack marked
"EQUIP" (or "OUT").
Optional (Select models)**
Using Tripp Lite cable (if supplied),
connect the DB9 port of your
computer to the DB9 port of your
UPS. Load software (if supplied) and
run installation program appropriate
to your operating system.
Turn your UPS's power
3
switch ON.
* Identified on the back of your UPS. Your UPS is designed to support only computer equipment. You will overload your
UPS if you connect household appliances, laser printers or surge suppressors to the battery-supported outlets. **Phone line
and DB9 port connections are optional. Your UPS will function properly without these connections. Make sure the equipment
you connect to the UPS's telephone jacks is also protected against damaging surges on the AC line.
3