Handling Electrical Cables - Dometic ePower T Instrucciones De Montaje

All manuals and user guides at all-guides.com
Safety and installation instructions
NOTICE!
A
 The generator is not suitable for use in water vessels.
 Do not make any alterations or conversions to the device.
 ePower T only: Do not fill up the tank too full. Petrol must not
be allowed to fill up to the neck of the tank. Check the lid is on
properly.
2.2 Mounting the device safely
CAUTION!
!
 Fire hazards
Do not install the generator in a box or room without any open-
ings, but in well-ventilated spaces instead.
 Install the generator on a stable surface.
 Do not tilt the generator more than 20° from the vertical position.
2.3

Handling electrical cables

WARNING!
!
 The electrical power supply may only be connected by a quali-
fied electrician (e.g. according to VDE 0100, Part 721 in
Germany).
CAUTION!
!
 Fit a fuse of at least 10 amps to the vehicle's power supply con-
nection.
 Attach and lay the cables so that they cannot be tripped over or
damaged.
NOTICE!
A
 Use cable ducts to lay cables through walls with sharp edges.
 Do not lay loose or bent cables next to electrically conductive
materials (metal).
 Do not pull on the cables.
24
ePower T, ePower T LPG
EN