Step 5 Setting Up The Network; This Unit's Network Setting - Panasonic DMR-E500H Manual De Instrucciones

5
STEP Setting up the Network
DVD
TV
DIRECT TV REC
AV
HDD DVD
1 2
4 5
7 8
CANCEL
0
SKIP
STOP PAUSE
DIRECT NAVIGATOR
TOP MENU
3,4,2,1
ENTER
ENTER
SUB MENU
PROG/CHECK
DISPLAY
TIMER ERASE
F
EXT LINK DUBBING
A B

This unit's network setting

Preparation
≥Connect this unit to the Home Network. This can be directly to a
computer or directly to another network compatible Panasonic
DVD recorder (➡page 10, 11).
≥When connecting directly to a computer or via a router with its
DHCP disabled
Check and set the computer's IP address (➡page 18).
1
While stopped
Press [FUNCTIONS].
2
Press [3, 4, 2, 1] to select
"SETUP" and press [ENTER].
3
Press [3, 4] to select "Network" and
press [1].
4
Press [3, 4] to select "Network
Function" and press [ENTER].
5
Press [3, 4] to select "Enable" and
press [ENTER].
Network Function
SETUP
Enable
Tuning
Disable
Others
Disc MAC Address : 00-08-97-24-01-C4
Unit ID : 4284 1491 6862 6641
Picture
Status : 0000-0000-20LU-3DDE
Sound 3900-0V03-0M52-0L00
Password : No password
Display
SELECT
Connection
ENTER
Network
RETURN
All manuals and user guides at all-guides.com
VOLUME
CH
SD/PC
3
CH
6
ShowView
9
INPUT SELECT
MANUAL SKIP
SLOW/SEARCH
PLAY/x1.3
FUNCTIONS
FUNCTIONS
RETURN
RETURN
STATUS TIME SLIP
REC MODE REC
CREATE
AUDIO
CHAPTER
C
6
Press [3, 4] to select "TCP/IP
Settings" and press [ENTER].
7
Press [3, 4] to select "Automatic
(DHCP)" and press [ENTER].
When connecting directly to a computer or via a router
with its DHCP disabled
Press [3, 4] to select "Manual" and press [ENTER]
(➡ page 19, To manually enter the DVD recorder's IP
Address).
SETUP TCP / IP Settings
Automatic (DHCP)
Tuning
Manual
Others
Disc IP Address : 192. 168. 0. 14
Subnet Mask : 255. 255. 255. 0
Picture
Default Gateway : 192. 168. 0. 1
Sound DNS Server : 192. 168. 0. 1
Display
SELECT
Connection
ENTER
Network
RETURN
≥IP Address:
Make a note of this IP address. You will
need it when operating this unit from the
computer.
8
Confirm that a connection has been
established.
y
Display
Now searching. . .
Connection
SELECT TAB
Network
ENTER
RETURN
Wait until the display changes (this may take a few minutes).
≥"Now connected to the network." is displayed if the
connection has been correctly established.
≥"Cannot connect to the network." is displayed if the
connection has failed. Check the LAN cable connection.
To exit the screen
Press [RETURN] several times.
To return to the previous screen
Press [RETURN].
[Note]
While "Now updating the settings. Please wait for a while." is
displayed, no operations will be accepted by this unit. Wait about 5
seconds until the highlights appear again.
∫ To change unit names
When more than one network compatible Panasonic DVD recorder
is connected, you need to give each a unique unit name so that
they can be distinguished. (Factory preset: "DVD Recorder")
After step 3 (➡ left)
1 Press [3, 4] to select "Unit Name Setting" and press [ENTER].
2 Enter the name (➡page 46).
RQT7751
17
17