Clock Settings; Operating Instructions; General Safety Considerations During Use - Vaillant VAI 6-025 WN Manual Del Usuario

6.2

Clock settings

Use the remote controller buttons to adjust the unit clock the
first time the unit is started or after replacing the batteries,
see Figure 6.2.
• Press the CLOCK button once.
The hour indicator start to flash on the remote controller
display.
• Press the + / - buttons to set the desired time:
When pressing the + / - buttons, the time configuration will
increase or decrease by 1 minute.
If the + / - buttons are kept pressed, the time will increase or
decrease rapidly.
• Press the CLOCK button once.
The hour indicator will stop flashing and the clock will start to
operate.
3
Fig. 6.2 Clock Settings.
Legend
1 Hour indicator
2 +/- buttons
3 CLOCK button
VAI6-WN-U_EN - 10/13 - Vaillant
All manuals and user guides at all-guides.com
1
2

OPERATING INSTRUCTIONS

7 Operating instructions
7.1 General safety considerations during
use
DANGER of injury and physical damage!:
a
-Do not let children play with the Air to Air heat
pumps unit. The unit is not designed for use by
children or infirm persons without supervision. Do
not sit on the outdoor unit under any circumstances.
-Do not put any objects on top of the unit.
-Do not operate the equipment whilst using
insecticides or pesticides. These could settle in the
unit and harm the health of people with allergies to
specific chemical substances.
-Avoid prolonged direct exposure to cooled air or
extreme temperatures in the room and do not direct
the air flow at people, especially infants, infirm
people or old people.
-Do not use this unit to preserve food, art work,
precision equipment, plants or animals.
-Do not cover the ventilation grille and do not insert
your fingers or other objects in the air inlets and
outlets, or between the unit slats whilst the unit is
operating. The high speed of the fan can cause
injuries.
-Always remember to disconnect the unit before
openning the Inlet grille. Never disconnect the unit
by pulling the power cord.
-Do not leave the power supply cord in a roll and
take care not to damage the power supply cord.
After installation the power plug should be easily
reached.
-Do not damage any parts of the unit containing
refrigerant by piercing the Air to Air heat pumps'
tubes with sharp or pointed items, by crushing or
twisting any tube or by scraping the coating off the
surface. If the refrigerant spurts out and gets into
your eyes it may result in serious eye injuries. Seek
immediate medical assistance.
-Do not interrupt the operation of the Air to Air heat
pumps unit by pulling the cord.
EN
- 7 -