Installation And Connection; Operation; Before Initial Use - Dometic GROUP Waeco CoolMatic CS Instrucciones De Montaje Y Uso

CS-SC.book Seite 20 Freitag, 15. Oktober 2010 5:06 17
All manuals and user guides at all-guides.com

Installation and connection

6 Installation and connection
The cooler is installed in the recess under the bed.
➤ Lift the mattress.
➤ Take out the drink holder (fig. 3, page 4).
➤ Unscrew the four screws (fig. 4, page 4) and remove the drawer.
➤ Unscrew the four screws (fig. 5, page 4) and remove the slider.
➤ Have the supply line for the cooler checked at a specialist Scania work-
shop.
➤ Take off the auxiliary heater cover and fasten the fixing kit to the positions
provided (fig. 6, page 4).
➤ Screw the screws provided into the holes provided (fig. 7, page 4).
➤ Lock the cooler with the fixing kit in the appropriate positions (fig. 8,
page 4).
➤ Screw the cooler to the fixing kit (fig. 9, page 5). Used the screws pro-
vided for this.
➤ Have the cable for the cooler laid by specialist Scania workshop.
✓ Installation is complete (fig. 0, page 5).
7

Operation

Note
Empty the cool box and switch it off before tilting the cab.
7.1

Before initial use

Note
Before starting your new cooler for the first time, you should clean
it inside and outside with a damp cloth for hygienic reasons
("Cleaning and maintenance" on page 21).
20
CoolMatic CS-SC