Troubleshooting; Scrapping - Viper AS4335C Instrucciones De Uso

INSTRUCTION FOR USE

TROUBLESHOOTING

Trouble
Machine not working
Vacuum motor not working.
The recovery water vacuuming
is insufficient.
The solution flow to the
brushes is insufficient.
The squeegee leaves marks on
the floor.

SCRAPPING

Scrap the machine by the qualified waste treatment institution.
Before the machine is scrapped, please take away and segregate below subassembly that relevant laws and regulations request must be
disposed in appropriate way.
Brush/Pad-holder.
–
– Plastic hose and plastic parts.
Electrical and electronic components. (*)
–
(*) Please contact our company service center destroying any electrical and electronic components.
Machine material composition and recyclability
Electric motors-various
Plastic-non-recyclable material
Plastic-recyclable material
Probable causes
The wiring not connected correctly or bad wiring.
Carbon brush wom out.
The wiring not connected correctly or bad wiring.
Bad vacuum motor.
The recovery water tank is full.
The hose is disconnected from the squeegee.
The vacuum grid is clogged or the float is
stuck closed.
The squeegee is dirty or the squeegee blades
are worn or damaged.
The tank cover is not properly closed, or the gasket
is damaged, or the Bend tube is clogged.
The recovery water tank is dirty.
The solution/clean water filter is dirty.
The ball valve does not open.
Bad ball valve.
Bad solution valve.
There are debris under the squeegee blades.
The squeegee blades are worn, chipped or torn.
Type
Aluminium
Ferrous materials
Wiring harness
Liquids
Rubber
Recyclable percent-
age
100%
29%
100%
80%
100%
0%
100%
20%
20
ENGLISH
Remedy
Check the wiring or contact distributor.
Contact distributor.
Check the wiring or contact distributor.
Contact distributor.
Empty the tank.
Connect.
Clean the grid or check the float.
Clean and check the squeegee.
Close the cover correctly, or replace the
gasket or clean the Bend tube.
Clean.
Clean the filter.
Regulating the ball valve handle.
Contact distributor.
Contact distributor.
Remove the debris.
Replace the blades.
AS4335C
weight percentage%
2%
23%
32%
1%
0%
1%
38%
3%