Squeegee Cleaning - Viper AS4335C Instrucciones De Uso

INSTRUCTION FOR USE

SQUEEGEE CLEANING

NOTE
The squeegee must be clean and its blades must be in good conditions in order to get a good drying.
CAUTION!
It is advisable to wear protective gloves when cleaning the squeegee because there may be sharp debris.
1. Push the machine to a level floor.
2. Ensure that the machine is off.
3. Lower the brush/pad-holder deck (I, Figure 7) and the squeegee (H) by lifting the pedal (G).
4. Disconnect the vacuum hose (B, Figure 12) from the squeegee connector (C).
5. Loosen the knobs (D) and remove the squeegee (E).
6. Clean the steel or the plastic squeegee (E, Figure 12). Clean the compartments (I) and the hole (H) especially. Check the front blade
(F) and the rear blade (G) for integrity, cuts and tears; if necessary replace them (see the procedure in the following paragraph).
7. Assemble the squeegee in the reverse order of disassembly.
A B C
E
Figure 12
Figure 12
17
ENGLISH
D
I
H
F G