Noise Information; Vibration Information - Worx MAKER X WX742 Manual Original

Machine weight (bare tool)
* X=1-999, A-Z, M1-M9 there are only used for different customers, there are no safe
relevant changes between these models.
** Voltage measured without workload. Initial battery voltage reaches maximum of 20
volts. Nominal voltage is 18 volts.
Category
20V Hub/HubX
We recommend that you purchase your accessories from the same store that sold you
the tool. Refer to the accessory packaging for further details. Store personnel can assist
you and offer advice.
MakerX series tools and 20V Hub/HubX are specially designed to work together, so do
not attempt to use any other devices.

NOISE INFORMATION

A weighted sound pressure
A weighted sound power
K & K
pA wA
Wear ear protection.

VIBRATION INFORMATION

Vibration total values (triax vector sum) determined according to EN 60745:
Vibration emission value a
The declared vibration total value may be used for comparing one tool with another,
and may also be used in a preliminary assessment of exposure.
WARNING: The vibration emission value during actual use of the power tool
can differ from the declared value depending on the ways in which the tool is
used dependant on the following examples and other variations on how the tool is
used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained.
The use the correct accessory for the tool and ensuring it is sharp and in good
Model
WA7160
WA7161
= 1.804 m/s² Uncertainty K = 1.5 m/s²
h
Capacity
Input: 20 V 10 A Max.
Output: 20 V
Input: 20 V 10 A Max.
Output: 20 V
or Output: 5 V 2 A (USB port)
280 g
10 A Max.
10 A Max.
L = 71.9 dB(A)
pA
L = 82.9 dB(A)
wA
3.0 dB(A)
EN
11