Component List; Technical Data; Noise Information; Vibration Information - Worx WX020 Manual Original

2. COMPONENT LIST

1. SPRAY WIDTH LEVER
2. AIR CAP
3. LIQUID CONTAINER
4. TRIGGER
5. VOLUME KNOB
6. LOCK ON/OFF DIAL
7. AIR FLOW CONTROL
8. BATTERY PACK*
9. FILLING CUP
10. WIRE BRUSH
11. DECLOGGING NEEDLE
12. NOZZLE*
12
13. GARDEN HOSE ADAPTER
14. AIR CAP EAR(SEE FIG. C1)
*Not all the accessories illustrated or described
are included in standard delivery.

3. TECHNICAL DATA

Type Designation WX020 WX020.X
(020-designation of machinery, representative of
battery operated Paint Sprayer)
Rated voltage
Maximum pressure
Color viscosity
Spray color volume
Volume of the container
Machine weight (bare tool)
** X=1-999, A-Z, M1-M9 there are only used for
20V Cordless Brushless Paint Sprayer
Wear protective gloves
WX020 WX020.X**
20 V Max***
20 KPa
300 Din-s
1000 g/min(2.6mm nozzle)
1000 ml
0.98 kg
different customers, there are no safe relevant
changes between these models.
*** Voltage measured without workload. Initial
battery voltage reaches maximum of 20 volts.
Nominal voltage is 18 volts.
Category
20V Battery
20V Charger
We recommend that you purchase your accessories
from the same store that sold you the tool. Refer to
the accessory packaging for further details. Store
personnel can assist you and offer advice.

4. NOISE INFORMATION

A weighted sound pressure
A weighted sound power
K & K
pA wA
Wear ear protection.

5. VIBRATION INFORMATION

Vibration emission value: a
Uncertainty K = 1.5 m/s2
The declared vibration total value and the declared
noise emission value have been measured in
accordance with a standard test method and may be
used for comparing one tool with another.
The declared vibration total value and the declared
noise emission value may also be used in a
preliminary assessment of exposure.
WARNING: The vibration and noise emissions
during actual use of the power tool can differ
from the declared value depending on the ways
in which the tool is used especially what kind of
workpiece is processed dependant on the following
examples and other variations on how the tool is
used:
How the tool is used and the materials being cut or
drilled.
The tool being in good condition and well maintained.
The use of the correct accessory for the tool and
ensuring it is sharp and in good condition.
The tightness of the grip on the handles and if any
anti vibration and noise accessories are used.
And the tool is being used as intended by its design
and these instructions.
Type Capacity
WA3014 4.0 Ah
WA3880 2.0 A
L : 74,6 dB(A)
pA
L : 85,6 dB(A)
wA
3 dB(A)
2
= 1,669 m/s
h
EN