Noise Information; Vibration Information - Worx WG829E Manual Original

ACCESSORIES
Battery pack (WA3551)
Charger (WA3880)
Shoulder strap
Wand
Nozzle (adjustable)
We recommend that you purchase your accessories
listed in the above list from the same store that sold you
the lawn trimmer. Refer to the accessory packaging for
further details. Store personnel can assist you and offer
advice.

NOISE INFORMATION

A weighted sound pressure
K
pA
A weighted sound power
K
wA
Wear ear protection

VIBRATION INFORMATION

Vibration total values (triax vector sum) determined ac-
cording to EN 62841:
Vibration emission value:
The declared vibration total value and the declared noise emission
value have been measured in accordance with a standard test
method and may be used for comparing one tool with another.
The declared vibration total value and the declared noise emission
value may also be used in a preliminary assessment of exposure.
WARNING: The vibration and noise emissions during
actual use of the power tool can differ from the declared
value depending on the ways in which the tool is used especially
what kind of workpiece is processed dependant on the following
examples and other variations on how the tool is used:
How the tool is used and the materials being cut or drilled.
The tool being in good condition and well maintained.
The use of the correct accessory for the tool and ensuring it is
sharp and in good condition.
The tightness of the grip on the handles and if any anti vibration
and noise accessories are used.
And the tool is being used as intended by its design and these
instructions.
20V Yard Sprayer
WG829E WG829E.9
1 /
1 /
1 1
1 1
1 1
L = 63.46dB(A)
pA
3dB(A)
L =74.46dB(A)
wA
3dB(A)
a <2.5 m/s
h
Uncertainty K = 1.5m/s2
This tool may cause hand-arm vibration syndrome if its use
is not adequately managed.
WARNING: To be accurate, an estimation of exposure
level in the actual conditions of use should also take
account of all parts of the operating cycle such as the times when
the tool is switched off and when it is running idle but not actually
doing the job. This may significantly reduce the exposure level
over the total working period.
Helping to minimise your vibration and noise exposure risk.
Always use sharp chisels, drills and blades.
Maintain this tool in accordance with these instructions and keep
well lubricated (where appropriate).
If the tool is to be used regularly then invest in anti vibration and
noise accessories.
Plan your work schedule to spread any high vibration tool use
across a number of days.
OPERATING INSTRUCTIONS
NOTE: Before using the tool, read the instruction
book carefully.
Intended Use:
This machine is intended for watering, spraying household
cleaners and other household items. It cannot be used for
other purposes.
ASSEMBLY & OPERATION
ACTION
ASSEMBLY
Assembling the Shut-off Assembly, Wand
and Nozzle
Attach the shut-off to wand, and tighten
the nut securely. Then attach the nozzle to
the end of the wand and tighten securely.
NOTE: Both sides of the wand are
interchangeable. The o-ring location can
2
also be adjusted as necessary.
NOTE: Replace the O-ring if needed.
Installing and Removing the Battery Pack
Checking the Battery Charge Condition
NOTE: Fig. B3 only applies for the battery
pack with battery indicator light.
Charging the Battery Pack
NOTE:
• The batteries are shipped uncharged.
Each battery must be fully charged before
the first use.
• More details can be found in charger's
manual.
OPERATION
11
FIGURE
See Fig. A
See Fig. B1,
B2
See Fig. B3
See Fig. B4
EN