Worx MAKER X WX742 Manual Original página 12

condition.
The tightness of the grip on the handles and if any anti vibration accessories are
used.
And the tool is being used as intended by its design and these instructions.
This tool may cause hand-arm vibration syndrome if its use is not
adequately managed.
WARNING: To be accurate, an estimation of exposure level in the actual
conditions of use should also take account of all parts of the operating cycle
such as the times when the tool is switched off and when it is running idle but not
actually doing the job. This may significantly reduce the exposure level over the
total working period.
Helping to minimize your vibration exposure risk.
Maintain this tool in accordance with these instructions and keep well lubricated
(where appropriate).
If the tool is to be used regularly then invest in anti vibration accessories.
Plan your work schedule to spread any high vibration tool use across a number of
days.
OPERATING INSTRUCTIONS
EN
NOTE: Before using the tool, read the instruction book carefully.
12
Intended use
This tool is intended for painting.
ASSEMBLY
1. Plug the spray gun into the compressor. Make sure the spray gun is fully inserted. (See
Fig. A1) After that, turn clockwise to adjust the spray gun to your desired position (See
Fig. A2) To disassemble, draw the spray gun out from the compressor.
2. Open the feeding cup cover and fill with paint. Then cover. (See Fig. B)
WARNING: Use paint specifically formulated for use with Air Brushes. DO
NOT use solvents that contain or emit harmful substances. DO NOT use
paints of high concentration, or the nozzle may be clogged. Recommended to
use water-soluble painting. Use colors which can be used with pressure value
14-18 PSI (0.10 -0.12 MPa)!
3. Connect the air brush and the hub. (See Fig. C)
WARNING: Before operation, make sure the speed control button on the
hub is at the"Min" position. (See Fig. D)
OPERATION
1. Confirm the speed control button is set to "Min". Grasp the tool by the grip. Press
the on/off switch on the hub. The dual function trigger regulates both paint volume and