Important Notice; Machine Accessories; Maintenance; Advice For Use - Zummo Z40 Manual Del Usuario

 Remove the basket together with the lower fruit classifier by pulling upwards until it is completely
released from its shaft (Fig. 26).
 Clean all the pieces with soapy water or put them in the dishwasher.
 Reassemble in this order: first fit the basket together with the lower fruit classifier onto the shaft (fit
the lower fruit classifier in the position of the calibre of oranges you intend to squeeze, either for the
medium kit (see fig. 8a) or the large kit (Fig. 8b); for the extra-large kit it should be removed (Fig. 27) and
then turn the basket manually until it is anchored (the pivots should enter their respective holes). Then
affix the fruit classifier inside the basket, making sure it fits properly and cannot turn (Fig. 25), screw in
the nut and finally fit the external basket (Fig. 23).

Important Notice

The normal use of the machine may cause the plastic parts that are exposed to juice to turn orange colour.
This is completely normal and does not imply a hygiene problem or affect the physical properties of the
plastic.
12

MACHINE ACCESSORIES

The machine has various squeezing sets of Cups, Balls and Fruit Classifiers to use depending on the size of
the fruit you wish to squeeze.
a Dark grey-coloured Cups and Balls plus Hopper Fruit Classifier for fruits with diameters
between 53 and 76 mm (Fig. 28).
b Light grey-coloured Cups and Balls plus Hopper Fruit Classifier for fruits with diameters
between 64 and 88 mm (Fig. 29). (Optional set not included with the machine)
c
Very light grey-coloured Cups and Balls plus Hopper Fruit Classifier for fruits with diameters
between 77 and 100mm (Fig. 30) (Optional set not included with the machine)
d Lower Fruit Classifier for fruits with diameters between 53-76mm and 64-88mm (Fig. 8a-8b)
Regardless of the squeezing set use, the Blade will always be the same.
13
MACHINE MAINTENANCE
Exterior machine maintenance: Consists of just daily cleaning.
Interior of the machine: After every 1.000,000 cycles, the inner machine guides must be lubricated and a full
cleaning carried out.
14

ADVICE FOR USE

 Always make sure you are using the right squeezing set of Balls, Cups and Fruit Classifier for the size of
fruit you wish to squeeze. If the fruit to squeeze is too big or too small for the squeezing kit used, the
quality of the juice may decrease, resulting in a bitter juice flavour.
The Hopper Fruit Classifier must be correctly selected according to the size of the fruit to squeeze.

If fruits are too large for the Fruit Classifier, the fruit will not fall into the Cup.

If fruits are otherwise too small, numerous pieces of fruits will fall at the same time into the Cup.

 We recommend to switch off the machine when is not in use. (Fig. 6)
15

IDENTIFYING DAMAGES

Damage
The display is not lit
ATTENTION!: Never mix components of different sets.
Cause and/or solution
No power supply.
Fuse burnt out. (Fig. 31)
Power cable not properly connected.
Switch power on. (Fig. 6)
Damp circuit board. Supply dry heat to the board.
21